Skip to main content

Heinlein invests in a fully automated centralised raw materials handling system

A central material supply system for producing pharmaceutical grade packaging products.

Heinlein, a successful company based in the town of Ansbach in Franconia, Germany, produces a wide range of closures and dosing systems, some of which are patented and predominantly designed for the pharmaceutical and cosmetics industry. When it came to expanding its production facilities, Heinlein opted for a modern and efficient material supply system from motan.

Class 7 cleanrooms

The company manufactures its products in controlled sterile environments using class 7 cleanrooms and operates its injection moulding machines in conditions that meet very high cleanliness standards. This alone would be sufficient reason to consider the use of a near dust-free central material supply system a must. However, the fact that a central material supply system also prevents any incorrect selection of materials, which are primarily supplied directly from silos, and the fact that the automated system is highly efficient, are also important points for the company.

New production hall with 20 injection moulding machines

When Heinlein built a new production hall for 20 injection moulding machines with clamping forces of between 250 and 2000 tonnes, it drew on its extensive experience with the raw materials handling system already installed in its existing production hall when it came to selecting a new material supply system. This hall contains a centralised conveying system manufactured by motan-colortronic that directly supplies 35 injection moulding machines with material from ten outdoor silos. Based on the company’s positive experience with this system and its low maintenance requirements, Heinlein opted for yet another motan-colortronic system to take care of all of the materials handling in the new production hall.

Additional flexibility and security

The machines in its new hall are supplied with raw material – which primarily comprises of PP as well as HDPE and LDPE – from a total of twelve outdoor silos. All of these materials are 1A pharmaceutical grade certified materials. The old and new material supply systems are furthermore connected to each other, which makes for greater flexibility and security. This is because, if needed, the new and existing silos can be used for supplying both the new and the existing production halls. The system was also equipped with a loading station for bagged materials for processing small quantities, such as TPE or other special types of polypropylene.

Hygiene requirements even for the material feedlines

All of the system’s material feedlines – from those leading from the silos to the automatic METROLINK distribution station to those leading to the machines – are made of stainless steel and meet Heinlein’s high hygiene requirements. They were installed on predefined sections along the hall’s walls specifically designed and built to support the entire supply infrastructure such as power lines, compressed air pipes as well as cooling water supply and return pipes.

Contamination free material supply

The entire system revolves around the METROLINK – the automatic distribution station, which, once set up, automatically and without any risk of contamination connects all of the relevant material supply system pipes with those of the relevant machines to be supplied. This means that there is zero risk that a machine could be supplied with the wrong material. The material supply system chosen by Heinlein takes up very little space and has 2×10 material feedlines and 2×10 outgoing lines leading to the machines. In contrast to other distribution stations, there is no need for switching any connections or emptying operations during conveying thanks to the permanent pre-defined material allocations in the METROLINK system.

 

Conveying with de-dusting modules

Heinlein also turned to motan-colortronic to meet its additive dosing needs and fitted its machines with volumetric MINIBLEND V disc dosing units and METRO G material loaders with de-dusting modules as the final items on the material feedlines. These devices are of various sizes in line with the relevant processing machine throughputs. The system’s proportioning valves can be used to easily feed back any regrind material into the production process. The MINIBLEND V devices dose the additives and colours into the base materials at the same time as they are drawn into the injection moulding machines. This means that there is no need for a mixer.

The company has also ensured that there is capacity for future expansion: The entire material supply system can easily be expanded to supply 40 injection moulding machines.

About Heinlein-Plastik-Technik GmbH

Heinlein primarily specialises in multi-component and, in some cases, patented closures, dosing systems and drug administration devices. The company is currently also producing increasingly more complex products, such as tamper evident closures and/or child resistant closures and products in different colours. Heinlein predominantly supplies pharmaceutical companies, companies producing homoeopathic remedies, lifestyle and chemical companies. The company employs around 160 staff and has production facilities occupying 16 thousand square metres.
It currently exports over 60 percent of its products. Heinlein has tripled its output since 2008 and now produces up to 4,000,000 standard and custom-made closures a day over three shifts. The company is certified to ISO 9001, ISO 15378 and ISO 13485 and operates in line with the HACCP principles.
www.heinlein-plastik.de