Skip to main content
motan newsmotan news

METROVAC SG

For standard conveying applications, motan's new METROVAC SG conveying station offers an optimal and inexpensive solution for smaller conveying systems. Consisting of a vacuum blower, a control and a cyclone dust filter, up to 8 hopper loaders can be connected to the PLC control.

The METROVAC SG station is available in various blower sizes between 0.85 and 4.3 kW. Thanks to the maintenance-free blower and in combination with a cyclone dust filter, the station is not only versatile, but can also be easily adapted to the size of your conveying system and expanded if needed.

 

In order to generate a reliable and constant vacuum, motan's conveying station uses side channel blowers. Especially with short to normal conveying distances, these are ideally suited for placing directly next to the processing machines with low noise.

 

The FC filters combine cyclone dust separators with a fine dust filter. The transparent dust collector makes removing accumulated dust quick and easy.

 

When using the optionally available bypass valve, filter cleaning is carried out automatically. Likewise, the filter cartridge is regularly cleaned by implosion air that flows through the cartridge.

For quick and trouble-free material changes, it is also possible to thoroughly clean the material feed lines of any material after each conveying cycle. Among other things, this is particularly important when conveying hygroscopic materials.

 

The PLC control is robust and user-friendly and is located at an ergonomically comfortable working height. An alarm combination of signal light and horn is already installed as standard. Up to 8 METRO SG HOS hopper loaders, up to 8 METROMIX / DUOMIX proportioning valves and up to 4 line-purging valves can be controlled.

 

 

Further information for METROVAC SG

Back

mo explains: " Injection molding produces sprues that can immediately be turned into regrind and reused. This makes sense because it saves money and protects the environment. If the initial material needs to be dried it can save even more money as regrind does not usually need to be dried if it is being reused immediately. Are you interested in more questions regarding plastics manufacturing and processing"?

More topics

Happy 25th anniversary FAKUMA

For the 25th time, Friedrichshafen, Germany is the place to be on the 17th to 21st October. Then, the FAKUMA will again be the most important and largest meeting place for the…

Read more
Events

Luger GmbH turns 50 – and has been a motan partner for 44 years!

In the run-up to December 1st this year, our Austrian distributor Luger GmbH will have every reason to celebrate. First of all the 85th birthday of company founder Willibald Luger,…

Read more
Customer stories

motan deepens partnership with nta Isny

Fostering and retaining young talent: These are the principles currently guiding the motan group.The group is supporting the University of Applied Sciences Isny (nta) with a…

Read more
Innovations

motan supports long-term research

The Linz Institute of Technology (LIT) receives an innovation center at the Johannes Kepler University in Linz, Austria. It will provide about 7,000 square meters of floor space on…

Read more
Customer stories

A unique plastic processing event in the Romanian Alps

Plastics Forum 2017

From the 7th to the 9th July 2017, the biennial Plastics Forum took place in Braşov, Romania. Initiator and organiser of this unique event for the Romanian…

Read more
Customer stories

Opening of the new Tech-centre

motan-colortronic gmbh has opened its new Tech-centre in Friedrichsdorf with an open house day. With the motto “materials management in practise “, participants used the…

Read more
Events